SHIFT KIT® Valve Body Repair Kit
This kit requires tool A4A6-RV-TK
Fits A6MF1/2, A6GF1, A6LF1/2/3, 6F24

SKU: SK®A6MF Category:
  1. Distributor Part Numbers
    TransGo SK A6MF
    A & Reds NA
    Capital Core NA
    MST NA
    Natpro K94944L
    OTS NA
    PDQ NA
    PNH TG211741ACK
    PTW K94944L
    Summit NA
    Transtar T102165
    WIT T211741ACK
  2. Documents
  3. Related Products
  4. General Details

    This A6MF SHIFT KIT® Valve Body Repair Kit fits 2009 and newer Hyundai and Kia vehicles with the A6MF1/2, A6GF1, A6LF1/2/3, as well as 2013-2016 Jeep and 2012-2016 Dodge vehicles with the 6F24 transmission. Common complaints with this transmission are brutal 6-4 kick-down bang, erratic shifting, flares or neutrals during up and downshifts. It may also set gear ratio and solenoid performance codes and have TCC shudder or slip complains and codes.

    This transmission uses two reducing valves in the valve body that often severely wear out their bores. Reducing valve #1 regulates the pressure going to the two ON/OFF solenoids as well as the OD, 2-6, 3-5-R and UD pressure switch valves. Reducing valve #2 regulates the pressure going to the six PWM solenoids.

    The purpose of the reducing valves is to limit the pressure going to the solenoids. The spring is calibrated to prevent solenoid feed pressure from exceeding a predetermined PSI, no matter what main line pressure is. This is necessary to prevent more fluid from being fed to the solenoids than they can effectively regulate and limit what max line pressure output is. If the pressure feeding the solenoids is too high or too low, their output will also be too high or too low. As a result, shift quality complaints and codes can occur along with low or high main line pressure.

    The other issue has to do with the TCC control valve bushing wear. Consequently, the computer loses the ability to control the lock-up clutch apply rate properly due to the loss of TCC apply pressure.

    Features and benefits:

    This TransGo SHIFT KIT® Valve Body Repair Kit includes two oversized USA-made steel reducing valves to completely restore the hydraulic circuit integrity. In order to install these two valves, the bores must first be reamed oversized. If you don’t already have the reamer and guides, you will also need TransGo part # A4A6-RV-TK. No expensive holding fixture required. Reusable high-quality USA-made steel reamer and heat-treated guide.

    • Codes P0731, P0732, P0733, P0734, P0735 and P0741
    • Brutal 6-4 kickdown bang
    • Erratic shifting complaints
    • Flares or neutrals on shifts
    • TCC shudder
    • TCC slip
    • Delayed engagements
    • (2) Oversized USA-made hardened steel reducing valves
    • Precision USA-made aluminum TCC control bushing
    • Valve body layout with showing springs, valves, and small parts location