SK 700

This TransGo 700 SHIFT KIT® Valve Body Repair Kit fits 1982 to 1993 General Motors vehicles equipped with the 700R4/4L60 automatic transmission. This kit was designed for 1982-1987 units with a type-1 valve body; however, it will fit all year models and valve body types. If you have a 1988 or later type-2 valve body, you can use the more economical “junior kit”, our part #SK 700-JR and achieve the same results.

Common complaints and failures of this transmission are: 2-4 band and 3-4 clutch failure, 1-2 slide bump, 2-3 cut-loose, low/reverse clutch failure, no 4^th or falling out of 4^th as well as 4-3-4-3 shuttle shifts and the infamous 3-2 coast downshift bang with the lever in the D3 range.

Features and benefits:

The kit features our patented Bootstrap® TV system that addresses the root cause of the band, 3-4 clutch, late and early shift failures by providing an all new TV system.  In addition, this kit provides specifically calibrated components to work with the new TV system and address the other complaints.

Corrects/Prevents/Reduces:

• TV that won’t adjust properly causing band and clutch failure, late shifts or early shifts
• Sticking TV valve
• 2-4 band failure
• 3-4 clutch failure
• Soft or slide-bump 1-2 shift
• 2-3 cut-loose
• Falls out of 4^th gear
• Shuttle 4-3-4-3
• Soft, late or no 4^th

Includes:

• No Stick TV valve, springs, spacer and aluminum washer
• Pressure regulator valve spring, snap ring
• Orifice cup plug
• (4) Governor springs
• (4) Accumulator seals
• (2) 1-2 accumulator springs
• 1-2 accumulator spring seat
• Servo cushion spring and shim (for band adjustment)
• .076” drill bit
• 3-4 accumulator spring
• (2) 1-2 TV valve springs
• 2-3 TV valve spring
• (6) 3-4 TV valve springs
• (4) Converter TV valve springs and spacer
• MTV up valve spring
• (3) Accumulator valve springs and wire clip
• (2) Line bias valve springs
• 3-2 control valve spring
• 5/16” steel checkball
• 5/16” plastic checkball
• (2) Valve body gaskets
• Roll pin extractor tool