SK U660E

SHIFT KIT® Valve Body Repair Kit
Fits 2006-18 U660E 6-SPD Transmission Removal Not Required

SKU: SK U660E Category:
  1. Distributor Part Numbers
    TransGo SK U660E
    A & Reds 95245-17009
    Capital Core NA
    MST NA
    Natpro K16944
    OTS K157908
    PDQ TG-SK U660E
    PNH TG277165A
    PTW K16944
    Summit NA
    Transtar T47165
    WIT T277165A
  2. Documents
  3. General Details

    This U660E SHIFT KIT® Valve Body Repair Kit fits 2006 to 2018 Toyota and Lexus vehicles equipped with the U660E and U660F automatic transmissions. Common complaints with these transmissions are shuttle or flare on the 2-3 shift, slips with throttle in 3rd and/or 4th gear and TCC performance codes.

    The first area of concern leading to the TCC complaints is a worn-out TCC boost valve and bushing. When the TCC boost valve and bushing wear out, the computer can no longer control the apply and release of the lock-up as it is supposed to.

    The other area of concern is a worn-out solenoid modulator valve bore. The purpose of solenoid modulator valve is to limit the pressure going to solenoids, just like an AFL valve or solenoid pressure regulator valve does on other units. The modulating valve and spring are calibrated to prevent solenoid feed pressure from exceeding a predetermined PSI, no matter what main line pressure is. This is necessary to prevent more fluid from being fed to the solenoids than they can effectively regulate and to limit what max line pressure output is. If the pressure feeding the solenoids is too high or too low, output will also be too high or too low. As a result, shift quality complaints and codes can occur along with low or high main line pressure.

    Features and benefits:

    The kit includes a drop-in USA-made hardened steel TCC boost valve and bushing to restores the hydraulic circuit integrity. Similarly, a new redesigned drop-in solenoid modulator valve system does not require any tooling. The furnished bushing and valve will restore the solenoid modulator valve function using the existing worn bore. Lastly, the drop-in USA-made hardened steel B2 Control vale utilizes an unworn area of the bore restoring the circuit integrity.

    Corrects/Prevents/Reduces:
    • Shuttle or flare 2-3 shift
    • Slips with throttle in 3rd and/or 4th gear
    • TCC slip codes
    Includes:
    • USA-made hardened steel TCC boost valve and bushing
    • USA-made hardened B2 control valve and spring
    • USA made hardened steel solenoid modulator valve, bushing, spring and end plug
    • 0.055” Drill bit