Reprogramming Kit™
with Manual Shift Control
Fits aluminum case 3-SPD TorqueFlite transmissions except 1960-65 models with rear pump or lock-up torque converter
- Distributor Part Numbers
- Tech Notes
For best results, use 3.8 to 5.0 band apply lever
Note: transmission removal necessary to install band lever.
- Documents
- General Details
This Torqueflite Performance Valve Body Reprogramming Kit with Manual Control is a full manual conversion for your automatic transmission.
This feature fully converts the valve body to manual/stick shift operation only – no automatic shifts. If at any time you want to switch back to automatic shifts, you have the ability to convert back to automatic.
Features:
- Instant full-race shifts
Corrects/Prevents/Reduces:
- Leaks out vent or lever seal
- Pump bushing and seal burn up
- Drain-back complaint
Includes:
- USA-made hardened steel manual valve with converter charge in park provision
- Race ready PR outer spring increases pressure more than the TF-2 kit to hold more torque and horsepower
- Rear servo springs, spacer and snap ring provides quick and clean manual 1-2 shift
- (2) Throttle valve springs for faster pressure rise
- Mumbly peg tool for easy detent spring and ball installation
- Case orifice plug to prevent 2-3 bind on upshift
- Line pressure high limit spring
- Drill gig and spacer increases front clutch capacity
- 3-2 downshift spring
- Shift command plate allows manual low at any speed
- Transfer plate and cup plug for optional ‘Stick Shift’ feature
- 1-2 shift valve spring for ‘Stick Shift’ feature
- High flow rate filter with no leak gasket
- (3) Drill bits
- Pan Gasket