4L80E-TCC

TCC Regulator Valve
Fits 1991-13 4L80E, 4L85E

SKU: 4L80E-TCC Category:
  1. Distributor Part Numbers
    TransGo 4L80E-TCC
    A & Reds NA
    Capital Core NA
    MST NA
    Natpro K33887TG
    OTS NA
    PDQ TG-4L80E-TCC
    PNH TG34741CK
    PTW K33887TG
    Summit NA
    Transtar T34741CK
    WIT A34741CK
  2. Videos
  3. Documents
  4. General Details

    1991 to 2013 newer General Motors vehicles equipped with 4L80E and 4L85E automatic transmissions often wear out the torque converter clutch (TCC) regulator valve bore in the valve body.

    The TCC regulator valve function is to regulates the torque converter clutch apply pressure. The computer varies the pulse width modulation of the TCC PWM solenoid, which regulates the apply pressure of the lock-up clutch. Because of the constant PWM solenoid induced oscillation, over time, excessive wear of the bore occurs. As a result, the computer loses the ability to control the lock-up clutch apply rate and slip rate properly due to the loss of TCC apply pressure.

    Features and benefits:

    This TransGo drop-in precision ground USA-made hardened steel TCC valve is designed to restore the hydraulic integrity of the circuit without the need to machine the bore. It has re-positioned longer lands so that both ends of the valves have better support which promotes less wear. Additionally, the valve has a machined groove cut where a scarf cut sealing ring is fitted. As a result, this new valve is a fix even with substantial bore wear. Two different springs are provided providing the option for either stock or slightly elevated TCC pressure and slightly firmer TCC apply.

    Optional ON/OFF lockup in 2 easy steps for high power hot rods or overloaded trucks:

    Convert lockup into an ON/OFF system for improved holding with a shorter apply time for severe duty applications.

    Corrects/Prevents/Reduces:
    • TCC slip
    • Codes 39, 68, P0741 and P0894
    • Damaged torque converter due to slip
    Includes:
    • Drop-in precision ground USA-made steel valve
    • Scarf-cut sealing ring
    • Orange spring for stock lock-up pressure and feel
    • Green spring for slightly elevated TCC pressure and slightly firmer lock-up apply
    • O-ring (for sizing only)
    • 0.125” drill bit for optional ON/OFF lock-up
    • 0.063” drill bit for optional ON/OFF lock-up
    • Rivet for optional ON/OFF lock-up